Bit Field Signed EXTract

NAME
	BFEXTS -- Bit field signed extract

SYNOPSIS
	BFEXTS	<ea>{OFFSET:WIDTH},Dn	(68020+)

	No size specs.

FUNCTION
	<ea> indicates source operand which a part of bits have to be
	extracted and extended. Offset enables to locate first bit of field;
	width specifies	number of bits of this field. Field is extracted,
	and extended to 32 bits by the MSB of the field. Result is stored
	in the data register Dn.
	Be careful, this instruction operates from MSB to LSB!!

FORMAT
	                                                  <ea>
	----------------------------------------=========================
	|15 |14 |13 |12 |11 |10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
	|---|---|---|---|---|---|---|---|---|---|-----------|-----------|
	| 1 | 1 | 1 | 0 | 1 | 0 | 1 | 1 | 1 | 1 |    MODE   | REGISTER  |
	|---|-----------|---|-------------------|-----------------------|
	| 0 |  REGISTER |Do |       OFFSET      |Dw |      WIDTH        |
	-----------------------------------------------------------------

	If Do = 0->Field "OFFSET" contains an immediate value which represents
	effective offset, value from 0 to 31.
	If Do = 1->Field "OFFSET" indicates number of a data register (bits 9
	and 10 of field cleared) which contains effective offset. Signed value
	is represented on 32 bits., so it's extended from -2 EXP 31 to
	(+2 EXP 31) -1.

	If Dw = 0->field "WIDTH" contains an immediate value between 1 and 31
	which indicates a width from 1 to 31 bits. A value of 0 indicates a
	width of 32 bits.
	If Dw = 1->field "WIDTH" indicates number of a data register (bits 3
	and 4 of field cleared) which contains width of bit field. The value
	modulo 32 can go from 1 to 31, indicating a width from 1 to 31 bits.
	A value 0 indicates a width of 32 bits.

REGISTER
	<ea> specifies destination, addressing modes are the followings:
	--------------------------------- -------------------------------
	|Addressing Mode|Mode| Register | |Addressing Mode|Mode|Register|
	|-------------------------------| |-----------------------------|
	|      Dn       |000 |N° reg. Dn| |    Abs.W      |111 |  000   |
	|-------------------------------| |-----------------------------|
	|      An       | -  |     -    | |    Abs.L      |111 |  001   |
	|-------------------------------| |-----------------------------|
	|     (An)      |010 |N° reg. An| |   (d16,PC)    |111 |  010   |
	|-------------------------------| |-----------------------------|
	|     (An)+     | -  |     -    | |   (d8,PC,Xi)  |111 |  011   |
	|-------------------------------| |-----------------------------|
	|    -(An)      | -  |     -    | |   (bd,PC,Xi)  |111 |  011   |
	|-------------------------------| |-----------------------------|
	|    (d16,An)   |101 |N° reg. An| |([bd,PC,Xi],od)|111 |  011   | 
	|-------------------------------| |-----------------------------|
	|   (d8,An,Xi)  |110 |N° reg. An| |([bd,PC],Xi,od)|111 |  011   |
	|-------------------------------| |-----------------------------|
	|   (bd,An,Xi)  |110 |N° reg. An| |    #data      | -  |   -    |
	|-------------------------------| -------------------------------
	|([bd,An,Xi]od) |110 |N° reg. An|
	|-------------------------------|
	|([bd,An],Xi,od)|110 |N° reg. An|
	---------------------------------

RESULT
	X - not affected
	N - Set if MSB of field is set. Cleared otherwise.
	Z - Set if all the bits of the field tested are zero.
	    Cleared otherwise.
	V - Always cleared.
	C - Always cleared.

SEE ALSO
	BFEXTU

HTML Conversion by AG2HTML.pl V2.941126c, perl $RCSfile: bfexts.HTML,v $$Revision: 1.1 $$Date: 1999/09/14 21:14:07 $ Patch level: 36 & witbrock@cs.cmu.edu